KETRON SD1000 Manuel D'instruction page 58

3. MIDI Implementation
2 ports of 16 channels are provided for a total of 32 channels. MIDI Message "F5 nn" is used to switch
between the two ports (nn=1 or 2).
MIDI Message HEX Code
NOTE ON 9nH kk vv
NOTE OFF 8nH kk vv
PITCH BEND EnH bl bh
PROGRAM CnH pp
CHANGE
CHANNEL DnH vv
AFTERTOUCH
CTRL 00 BnH 00H cc
CTRL 01 BnH 01H cc
CTRL 05 BnH 05H cc
CTRL 06 BnH 06H cc
CTRL 07 BnH 07H cc
CTRL 10 BnH 0AH cc
CTRL 11 BnH 0BH cc
CTRL 64 BnH 40H cc
CTRL 65 BnH 41H cc
CTRL 66 BnH 42H cc
CTRL 67 BnH 43H cc
CTRL 71 BnH 47H cc
CTRL 72 BnH 48H cc
CTRL 73 BnH 49H cc
CTRL 74 BnH 4AH cc
CTRL 75 BnH 4BH cc
CTRL 76 BnH 4CH cc
CTRL 77 BnH 4DH cc
CTRL 78 BnH 4EH cc
CTRL 84 BnH 54H vv
CTRL 91 BnH 5BH vv
Description
Midi channel n(0-15) note ON #kk(1-127), velocity vv(1-127). vv=0
means NOTE OFF
Midi channel n(0-15) note OFF #kk(1-127), vv is don't care.
Pitch bend as specified by bh|bl (14 bits)
Maximum swing is +/- 1 tone (power-up). Can be changed using
« pitch bend sensitivity ». Center position is 00H 40H.
Program (patch) change. Specific action on channel 10 (n=9) : select
drumset. Refer to sounds / drumset list. Drumsets can be assigned to
other channels (see SYSEX MIDI channel to part assign and part to
rhythm allocation)
vv pressure value. Effect set using Sys. Ex. 40H 2pH 20H-26H
Bank select : Refer to sounds list. No action on drumset
Modulation wheel. Rate and maximum depth can be set using SYSEX
Portamento time.
Data entry : provides data to RPN and NRPN
Volume (default=100)
Pan (default=64 center)
Expression (default=127)
Sustain (damper) pedal
Portamento ON/OFF
Sostenuto pedal
Soft pedal
TVF Resonnance modify (same as nrpn 0121h)
Env release time modify (same as nrpn 0166h)
Env attack time modify (same as nrpn 0163h)
TVF cutoff freq modify (same as nrpn 0120h)
Env decay time modify (same as nrpn 0164h)
Vibrato rate modify (same as nrpn 0108h)
Vibrato depth modify (same as nrpn 0109h)
Vibrato delay modify (same as nrpn 010Ah)
Portamento control
Reverb send level vv=00H to 7FH