Introduction; Safety Definitions; General Safety - Husqvarna HP100-1 Manuel D'utilisation

Introduction...................................................................124
Safety............................................................................124
Assembly...................................................................... 125
Operation...................................................................... 125
Product description
The models HP100-1, HP200-1 are hearing protection
with headband and the models HP200-2 are hearing
protection for a helmet. The products are made as a
protection against harmful noise.

Safety definitions

The definitions below give the level of severity for each
signal word.
WARNING: Injury to persons.
CAUTION: Damage to the product.
Note: This information makes the product easier to use.

General safety

WARNING: Read the warning instructions
that follow before you use the product.
• Use and save these instructions.
• For optimal fit and function, make sure that you have
selected the correct product for your use.
• Do not change or remove parts on the product. Only
do changes that are given in this operator's manual.
• The noise attenuation of the product will be severely
impaired if you do not follow the instructions in this
operator's manual. Earmuffs, and in particular
cushions, may deteriorate with use and should be
examined at frequent intervals for cracking and
leakage, for example.
• This product may be adversely affected by certain
chemical substances. Further information should be
sought from the manufacturer. Keep away from
124
Contents
Maintenance................................................................. 125
Transportation, storage and disposal........................... 125
Technical data.............................................................. 126
Accessories.................................................................. 127

Introduction

Compliance and approvals
Tested in accordance to ANSI Specifications
S3.19-1974 and S12.6-1984 and meet CSA Z94.2-M
1984 requirements for Class "A" hearing.
Safety
aggressive substances and clean the product
regularly. Use a cloth with water and soap. Do not
wash or put fully into water.
• Only use Husqvarna original spare parts.
• Never use the earmuffs longer than 10 years from
the manufacturing date stated on the packaging.
Safety instructions for operation
• The wearer should ensure that the earmuffs are
worn at all times in noisy environments.
• Be more careful and listen for warning signals when
you use the product. The noise from warning signals
can be decreased when you use the product.
• Make sure that the product is not hit during
transportation and use.
• Only use the product between temperatures -20°C
and +55°C. If you use the product in other
temperatures, this can cause damage to the
mechanical parts.
• Make sure that you know how to use the product
before use.
• The fitting of hygiene covers to the cushions, may
affect the acoustic performance of the earmuffs.
Always use original accessories.
• Do not push the earmuffs against the helmet shell. If
you do that, it can cause cracks around the side of
the helmet.
(Fig. 5)
• Do not put the product in storage at temperatures
above +55°C, for example on a dashboard. Do not
put the product in storage at temperatures below
-20°C.
• The wearer should ensure that the earmuffs are
fitted, adjusted and maintained in accordance with
this operator's manual.
1138 - 003 - 12.06.2019