Safety Instructions; In General; Warning Levels - Goobay 71360 Mode D'emploi

1

Safety instructions

1.1

In general

The user manual is part of the product and contains important information for
correct use.
>> Read the user manual completely and carefully before use.
The user manual must be available for uncertainties and passing the product.
>> Keep this user manual.
>> Installation, assembly, maintenance and repair work must be
carried out only by trained electrical specialists.
Risk of electric shock
>> Cut off power supply before any work on the product, switch off
safety fuses and secure against reconnection.
>> Assure and check the absence of voltage before any work on
the product.
>> Do not modify product and accessories.
>> Do not cover the product.
>> Do not use in sealed environments.
>> Avoid stresses such as heat and cold, moisture and direct sun-
light, vibration and mechanical pressure.
Motion detectors are not suitable as a component of alarm systems within the
meaning of the Association of Property Insurers (VdS). They can trigger false
alarms if the installation place has been chosen unfavorably.
>> Only use EN 60998-2-1 and EN 60998-2-2 tested terminals.
>> Follow local installation and building regulations.
>> In case of questions, defects, mechanical damage, trouble and
other problems, non-recoverable by the documentation, contact
your dealer or producer.
>> Use product, product parts and accessories only in perfect
condition.
>> Pay attention to current-carrying or other lines, lying behind
plaster and do not damage them!
>> Space angle between 90-120 ° - Not suitable for accent lighting.
1.2

Warning levels

Warnings against hazards that may result in serious
injuries or death in case of nonobservance.
Warnings against hazards that may result in injuries in
case of non-observance.
Warnings against hazards that may result in material
damage in case of non-observance.
12