König Electronic KN-HDMICON10 Mode D'emploi page 4

Connections and Operation:
Before installation, please make sure all devices you wish to connect have been turned off.
• Connect the input sources into converter (Input cables are optional)
• Connect the HDMI device into the HDMI Output slot in the back of the converter.
• Insert the DC side of 5V power supply into the converter and then connect the AC side of the
power supply into the wall outlet
DVD
Declaration of conformity
We,
Nedis B.V.
De Tweeling 28
5215MC 's-Hertogenbosch
The Netherlands
Tel.: 0031 73 599 1055
Email: info@nedis.com
Declare that product:
Name: Component to HDMI converter
Model: KN-HDMICON10
Description: Component signal to HDMI signal converter
Is in conformity with the following standards
EMC: EN 55022: 1998 + A1: 2000 + A2: 2003
EN 55024: 1998 + A2: 2003
LVD: EN 55022: 2006
EN 61000-3-2: 2000 + A2: 2005
EN 61000-3-3: 1995 + A1: 2001 + A2: 2005
EN 55024: 1998 + A1: 2001 + A2: 2003
Following the provisions of the 2004/108/EC directive.
's-Hertogenbosch, 01 February 2008
Mrs. J. Gilad
Purchase Director
Component to HDMI
CONVERTER
4
HDMI Monitor