Troubleshooting; Warning Messages - Elinchrom ELB 500 TTL UNIT Manuel D'utilisation

TROUBLESHOOTING

SOFT RESET
To reset all settings to default values, push the MENU (4.) and the
LEFT buttons (11.) at the same time and hold for at least 1 second.
The unit will reboot and will clear all working parameters. This will
not reset the counter in the "Info" menu.

WARNING MESSAGES

Wait until the unit has cooled down.
The unit will switch back to the normal
operation as soon as the temperature
decreases to a normal working level.
EMPTY BATTERY
When the battery is empty, the EL bouton
is blinking red. Plug the charger and wait
about 4 min. until the unit shutdown.
Press to switch-on the unit.
HEAD ERROR
The "head error" message appears if a
Quadra head is connected which is not
the ELB 500 head.
Please ensure that only the ELB 500 head
is used with the ELB 500 TTL unit.
Never plug any head of other brands into this unit, apart from
dangerous voltages, this would destroy the unit and the head!
EN
29