T-Fal SuperGrill Mode D'emploi page 8

Setting
1
8
1
3
5
7
1.
Remove all packaging materials
from the inside and the outside
of the appliance.
2-3.
2
Before using for the first time,
remove the plate and clean the
plates with warm water and a
little dishwashing liquid, rinse
and dry thoroughly.
4.
4
Insert removable drip tray at the
front of the appliance.
5-6.
To fit the lower grill plate: put
the plate at an angle, insert
the plate into the two notches
6
located in the middle of the grill,
then push the grill plate down
to lock into position underneath
the metal tabs located on both
sides of the appliance.
7-8.
8
Fit the upper grill plate in the
same way by holding the plate
at an angle and inserting the
upper plate into the two notches
located in the middle of the grill.