DHG SystemRoMedic AutoSlide Manuel D'utilisation page 3

AutoSlide AutoSlide
System
AutoSlide is used to aid transfers into and out of car seats. It consists of two sections with surfaces that slide against
each other. AutoSlide has a tension strap for fastening at the back. There are handles at the sides for caregivers.
Check Safety
Visual inspection
Check the condition and function of the assistive device regularly. Always inspect the product after laundering. Check to
ensure that seams and material are free from damage. Check to ensure that fabric is not worn or faded. If there are signs
of wear, the product must be discarded.
Always read the user manual
Always read the user manuals for all assistive devices used during a transfer.
Keep the user manual where it is accessible to users of the product.
Always make sure that you have the right version of the user manual.
The most recent editions of user manuals are available for downloading from our website, www.directhealthcaregroup.com.
Placement of AutoSlide
System
I F U
Instructions for use - English
Mechanical load
Apply pressure to buckles and handles and verify that they will
not open or break under heavy loads.
Friction test
Low friction - Ensure that the surface is smooth and slides
effortlessly. Compare with a new product.
Place AutoSlide with the smaller section's rough surface
facing the car seat cushion. Fasten the tension strap
around the back support and tighten securely.
3