Service And Support - Eminent Powerline Mini EM8024 Mode D'emploi

14 |
ENGLISH
Q. My Powerline Mini adapters do not communicate with each other?
A 1. Your Powerline Mini adapters might have different or unknown
networknames/passwords. Connect each Powerline Mini adapter directly to your
to your network card and reset the Network Name for each adapter to "Home
Plug" by using the PowerPacket utility.
A 2. Check your network settings (refer to the Eminent Advanced Manual on CD-rom).
Chances are these are not correctly configured. Your network needs a correctly
functioning TCP/IP protocol that is configured as 'Automatically obtain an IP
address'.
Q. Is my Powerline Mini home network visible for my neighbors?
A. Normally de Powerline Mini signal is being filtered by the current meter in the
meter cupboard and therefore too weak to be visible by your neighbors. We do
however recommend you to secure your Powerline Mini network.
Q. Can I amplify the Powerline Mini signal? I need to bridge large distances or I
need to couple different phases.
A. Yes, the Powerline Mini signal can be amplified. This can be done by using two
different
network names (for instance A and B) on two different locations after which you
connect an Powerline Mini adapter from location A to an Powerline Mini adapter
from location B, using a network cable.

5.0 Service and support

This users manual has been carefully written by Eminent's technical experts.
If you have problems installing or using the product, please fill out the support form at
the website www.eminent-online.com/support.