Yamaha AirWired YIT-W12 Mode D'emploi page 7

Charging an iPod
You can charge the iPod by connecting the transmitter to your PC using the
supplied USB cable. Also, you can enjoy iPod music on your Yamaha product
while charging the iPod.
NOTE
• Charging may not be possible depending on the USB power supply capability of your PC.
• Data synchronization between the iPod and PC may start automatically when they
are connected. You cannot play back iPod audio on your Yamaha product during data
synchronization. Please wait until data synchronization is completed, or cancel it as
necessary.
Playing back PC music
1
Check that the transmitter and your Yamaha product are set
to the same group ID (C1, C2 or C3).
2
Connect the transmitter to your PC with the supplied USB
cable.
The USB driver software will be automatically installed on your PC (only
the first time the transmitter is connected to the PC).
USB cable (supplied)
USB
USB cable (supplied)
5
En