Yamaha AirWired YIT-W12 Mode D'emploi page 11

Masquer les pouces Voir aussi pour AirWired YIT-W12:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
There is a device using 2.4-GHz band
range (such as microwave ovens,
cordless phones and Wi-Fi devices)
nearby.
No sound is coming from the Yamaha product when playing back
music stored on an iPod.
Your iPod is not connected to the
transmitter firmly.
The volumes of the iPod and Yamaha product are not reflected one
another.
Your iPod is not connected to the
transmitter firmly.
No sound is coming from the Yamaha product when playing back
music stored on a PC.
The group ID is assigned to the A1–A3
set or B1–B3 set.
Ring tone for iPhone is output from the Yamaha product.
Your iPhone received a call while it is
connected to the transmitter.
The communication between Wi-Fi devices becomes unstable.
There are signal interferences between
the transmitter and your Wi-Fi devices.
Move those devices away from the
transmitter and your Yamaha product, or
turn off the power of the wireless devices.
If you are using a wireless router, change
the wireless channel to the highest one.
Refer to documentation provided with the
wireless router.
Specify another group ID (p.3).
Reconnect the iPod to the transmitter.
Reconnect the iPod to the transmitter.
Change the group ID of the Yamaha product
and transmitter to the C1–C3 set (p.3).
As necessary, disable the ringtone output
on your iPhone.
Move the transmitter away from your Wi-Fi
devices. If the problem happens frequently,
disconnect the iPod (or the USB cable
connected to the PC) from the transmitter
and reconnect it after a while.
Specify another group ID (p.3).
9
En

Publicité

Table des Matières
loading

Table des Matières