Article Overview And Items Supplied; Before Initial Use - DS Produkte 00072 Mode D'emploi

Keep the article away from heat sources (e.g. ovens, fi re).
■
Do not expose the article to extreme temperatures, strong temperature fl uctuations, direct sunlight or moisture.
■
Do not drop the article or subject it to severe impact.
■
The article is only splashproof. Never immerse the article in water or other liquids. Protect the fi tness-band from rain
■
and always take it off before you take a shower or bath!

Article Overview and Items Supplied

6
5
4

Before Initial Use

1. Take the article out of its packaging and check it for transport damage. If you notice any damage, do not use it but
contact our customer service department.
2. Charge up the battery (see the "Charging Up the Battery" section).
3. Download the app for operating the fi tness-band from your App Store (see the "Downloading the App and Connec-
ting to the Fitness-Band" section).
Charging Up the Battery
The battery of the band can be charged via the Micro-USB port:
1. Remove the cap from the Micro-USB port (6).
2. Connect the USB cable with the Micro-USB connector to the fi tness-band.
3. Connect the USB cable with the USB connector to an appropriate USB socket on your computer. The display (5)
shows the message "Searching phone". The battery is automatically charged while the USB cable is connected.
Note: The fi tness-band displays "Searching phone" because it cannot connect to the app properly during the charging
process.
4. To fi nd out the battery status, press button 2 (3) on the fi tness-band. On the display you are shown the battery status
in the form of a battery symbol (each of the four bars represents approx. 25% battery power).
Downloading the App and Connecting to the Fitness-Band
CAUTION!
To operate the article, you require a Bluetooth
■
higher.
1. Download the app from the App Store (iOS) or Play Store (Android):
– do this by scanning the QR code on the packaging or
– search directly for the app LTWH05.
2. Switch on Bluetooth
3. Open the app.
4. Select the "Einstellungen (Settings)" tab and under the "Wireless" entry select "Bluetooth".
5. The app uses Bluetooth
pedometer). The app connects to the fi tness-band and automatically updates the date and time.
Putting On the Band
Place the band around your wrist and close the snap fastener (1). Make sure when you do this that it is not too loose
and that both studs fi t securely in the holes.
We recommend that right-handed people should wear the band on their left arm and left-handed people should
wear it on their right arm so that the activity values are not distorted by excessive arm movements.
00072_DE-EN-FR-NL_A4_V1.indb 9 00072_DE-EN-FR-NL_A4_V1.indb 9
-enabled smartphone or tablet and at least Android 4.3 or iOS 7.0 or
®
® on your smartphone.
® to search for all available devices and displays them. Select the fi tness-band (displayed as:
9
1 Snap fastener
1
2 Button 1
3 Button 2
4 Band length adjustment
5 LED display
6 Micro-USB port with cap (under the display)
2
3
Not shown:
• USB cable (A connector to Micro B connector)
EN
04.08.2016 11:05:30 04.08.2016 11:05:30