Gregster GRG-MR-010 Mode D'emploi page 18

4. ASSEMBLY INSTRUCTIONS
4. Step 4
Turn the frame and place the rear support frame on the floor.
Remove the four self-tapping screws (10) from the end caps of the front stabilizer tube
(8 L/R). Those are preinstalled to the end caps. Attach the end caps to the front support
frame (9) using four self-tapping screws (10).
Attach the front support frame (9) to the frame (1) and secure with four hexagon socket
screws (19).
GRG-MR-010-IM-DE+GB+FR-05.indb 34-35
8L
8R
10
10
10 10
19
9
1
34
4. ASSEMBLY INSTRUCTIONS
5. Step 5
Turn the frame and place the front support frame on the floor.
Remove the safety pin (35) and unfold the frame. Then reinsert the safety pin (35) into
the frame to fix latter one.
Note:
• Slightly lift the frame before inserting the safety pin.
• Make sure both safety pin holes are exactly aligned on top of each other.
• Insert the safety pin (35) through the holes.
35
35
21/6/2016 10:19 AM