Beyerdynamic DT 1770 PRO Mode D'emploi page 3

4
Thank you for selecting the dynamic DT 1770 premium studio headphone with Tesla 2.0
drivers from beyerdynamic. Please take some time to read carefully through this manual before
using the product. Please keep the manual. When passing on the headphone to a third party,
please pass on the manual as well.
Safety Instructions
• Exposure to excessive sound levels for longer periods can damage your ears
resulting in permanent noise-induced hearing loss. Use a low volume!
• According to regulations to protect employees against damages caused by noise
and vibrations, please follow these instructions:
85 dB SPL for max. 8 hours
88 dB SPL for max. 4 hours
91 dB SPL for max. 2 hours
94 dB SPL for max. 1 hour
97 dB SPL for max. 30 minutes
100 dB SPL for max. 15 minutes
• When connecting the headphones, please ensure that the volume is turned
down to minimum. Adjust the volume after putting on the headphones.
• With wired headphones you should avoid sharp movements, which could cause
the headphones to fall off your head. You could be seriously injured especially
if you are wearing pierced earrings, spectacles etc. The cable could wind around
your neck and cause strangulation.
Supplied Accessories
1 x Pair of leatherette ear pads, black
1 x Hard case
DT 1770 PRO – Studio Headphone
1 x Straight cable, 3 m
1 x Coiled cable, 5 m (stretched out)
DT 1770 PRO – Studio Headphone
Application
Due to its closed design with a high ambient noise attenuation and an enormous maximum
sound pressure level, the DT 1770 PRO is ideal for musicians, sound engineers and producers
for professional studio or monitoring applications.
The efficient Tesla 2.0 drivers ensure a perfect sound with an excellent resolution,
spaciousness and high output level. Perfect for mixing and mastering in the studio. Their
extremely high level of efficiency is useful for users in loud environments such as sound
engineers when listening to PA systems or musicians.
The DT 1770 PRO features a modern design with a discrete elegance of all components such
as end pieces, yokes, ear cups and headband. All components are replaceable and ensure a
long lifetime of the headphone.
The comfortable, replaceable ear pads and the adjustable headband with replaceable pad
ensure superior comfort for a long period of time and an absolutely safe fit. The single-sided
cable is detachable and lockable. The supplied hard case ensures safe transport or storage.
Maintenance
As with any equipment which will be used in close proximity to sensitive areas of the body, it
is essential that the ear pads and headband are kept clean. Use a damp cloth for cleaning
using warm water only taking care not to allow any water drops into the ear cups or transducers.
If necessary, you can carefully remove the ear pads and headband pad and clean them with
mild soapy water.
WARNING: Never use any solvent cleaning agents! Furthermore, the pads must be completely
dry before they are attached to the headphone again.
Should it become necessary to replace the ear pads or the headband pad, refer to "Spares and
Accessories".
If other components have to be replaced, please contact your local beyerdynamic
representative.
5