Characteristics - Conductix-Wampfler 040873-015x2,0 Instructions D'utilisation

Operating Instructions
Balancer
040873-...
•
Adjust the housing (5) on the axle (11); adjust it to the housing (21) and lock it;
3 Nm adjustment of the screw (40).
•
After installation, stress the spring of the spring/drum unit (13) with the screw (45):
whereby raise the lock (8) and the pin (4) until the screw (45) is adjusted on the housing (5) (figure f, detail B).
•
Install the balancer according to the operating instructions.
With a hanging load adjust the balancer as wished: make sure that the load seats solidly on the ground or on the folk lift
before adjustment.
The use of spare parts which are not genuine can generate safety problems, alter the capacity of the balancer and cause risks
during maintenance. In that case our guaranty is not valid.
Repair and maintenance have to be executed through authorised experts.

7 Characteristics

Order number
040873-015x2,0
040873-020x2,0
040873-025x2,0
040873-030x2,0
040873-035x2,0
040873-045x2,0
040873-055x2,0
040873-065x2,0
040873-075x2,0
040873-090x2,0
040873-105x2,0
BAL0400-0019b-D/E/F
www.conductix.com
Load (kg) Cable extension (m)
10 – 15
15 – 20
20 – 25
25 – 30
30 – 35
35 – 45
45 – 55
55 – 65
65 – 75
75 – 90
90 - 105
2,0
Weight (kg)
10,3
10,6
11,2
11,5
11,8
12,4
12,5
13,6
14,5
17,3
18,0
Seite 17 von 26