Battery Status - HAEGER BS-DIG.010A Mode D'emploi

English

Battery Status

•
When the low battery symbol
is low. Open the battery compartment and replace the old batteries with new
ones.
• Used batteries must not be disposed of as household waste. Do not incinerate
batteries because they might explode at high temperature. Contact your local
authority for information concerning reclamation and disposal of batteries.
• When replacing batteries, always use brand new battery of the same type.
Operation
The balance was designed to indicate precisely the increase in or the loss of weight.
1. Position the balance on a hard, flat surface (avoid carpets). Uneven floors lead
to imprecise readings.
2. Switch on the scales by pressing lightly with your foot or toes on the glass
surface.
3. Step on the balance. Distribute your weight equally on the balance and wait for
the balance to calculate your weight.
4. Your correct weight will then be displayed in the following:
5. If you receive an error indicator "" wait for the scale to automatically shut
down and restart the weighing process.
6. When you have got down from the scales they switch off automatically after 10
seconds in order to prolong battery life.
Selecting weight unit
Turn the scale on by pressing on glass surface. Before the display switch off press the
UNIT button to select kg or lb. This button is on back side of the scale.
Overload
1. When the loading capacity exceeds the maximum capacity of the Digital Scale,
the letters  will be displayed on the LCD screen.
2. Remove the item(s) from the scale platform to avoid damage to the scale.
2

appears on the LCD screen, it indicates that the battery
Instructions for use