Facom BSYS.BPMUSIC Notice Originale page 36

EN
PLAYING AUDIO FROM AN
EXTERNAL DEVICE (AUX/
BLUETOOTH)
The BSYS .BPMUSIC can be used to play
sound from an external device, through its built-
in speakers, in one of two connection options:
• Auxiliary
• Bluetooth
NOTE: The top compartment can also be used
to store, protect and charge some portable
audio devices, such as a smart phone or MP3
player . The USB power port can charge/power
most devices that can accept power through a
USB charging port (5V/1A) .
CONNECTING AN AUXILIARY DEVICE
7 . Connect a 3 .5 mm audio cable between
the auxiliary input jack and the output jack
of your audio device .
Press the audio source button (
8 .
AUX is displayed .
9 . Operate the audio through the connected
device .
CONNECTING A DEVICE THROUGH
BLUETOOTH
The BSYS .BPMUSIC can connect to Bluetooth
capable audio devices through Bluetooth
communication .
NOTE: The Bluetooth mode can store up to
8 users .
1 . Enable the Bluetooth of the audio device
to be connected .
2 . Press the audio source button (
until the Bluetooth symbol is displayed
), or press the Bluetooth button
(
( ) . This operation enters the
Bluetooth mode .The Bluetooth button
( ) blinks slowly .
Press the Bluetooth button (
3 .
seconds to make it discoverable .
A discoverable signal sounds and the
Bluetooth button (
4 . Look for the BSYS .BPMUSIC (display
name: ToughSystem Music) on the
audio device to be connected, and
select it .
Once connected a connected signal
sounds . The Bluetooth symbol is
displayed on the LCD screen and
the Bluetooth button lights in steady
blue . Operate the audio through the
connected device .
36
NU-BSYS.BPMUSIC_0617.indd 36
TROUBLESHOOTING
Weak Battery Packs
Weak batteries will continue to function but
) until
should not be expected to perform as well .
When the appliance is powered by a battery
pack and its charging level falls below 10%,
the low battery indicator is displayed .
Battery Pack Protection
To protect the life of the battery pack, the
appliance will shut off when the battery's
charging level becomes too low . If this
happens, connect the BSYS .BPMUSIC to
an outlet with the AC/DC power adaptor and
charge the battery pack .
Music Stops
When dropping the appliance in its vertical
)
position the battery pack may fall out of its
receptacle . If the music is operated by the
battery pack, the music will stop . To resume,
open the battery pack cover and reposition
the battery pack .
) for 3
) blinks fast .
The next time this device is in its
Bluetooth ON mode, it will automatically
discover and connect to the
BSYS .BPMUSIC .
NOTE: The appliance connects to the
last connected device . A connected
signal sounds .
• If the last connected device is not
available, the Bluetooth button blinks
until found by one of the other previously
connected devices .
NOTE: To disconnect from a device and
become discoverable for other devices,
press the Bluetooth button (
3 seconds, or press the selection dial
and select Make Discoverable .
) for
30/06/2017 08:04:04