Important Notice - BaBylissPro Hybrid Styler Mode D'emploi

ENGLISH
Hybrid Styler
BAB8125EPE
This appliance is intended for pro-
fessional use.

IMPORTANT NOTICE

The plate/barrel will be extremely
hot when the temperature regula-
tor slide switch is set at its highest
setting. Extra care should be taken
when using.
This product may emit smoke during
initial use. The smoke is not harmful
and will quickly disappear. It is only
the protective application on the
heating element being burned off.
FEATURES
• EP TECHNOLOGY 5.0 plates
• 32 mm plates
• 32 mm diameter in closed position
• Surround heat
• Double lock-in function
• On/off switch
• Advanced Heat Management Sys-
tem™: immediate heat-up
• Temperature selector – 3 settings
170°C – 200°C – 230°C
• Easy-to-read temperature lights
• Easy hold cool tip and thumb rest
• Protective gloves
• 2.70 m swivel cord
EP TECHNOLOGY 5.0
A micrometric metallic coating
obtained by electroplating, a very
technical process similar to what is
done in jewelry avoiding friction on
hair for even more smoothness, con-
taining no chemical agents for better
resistance to high-heat and provid-
ing even heat distribution.
Plates:
• 3 x harder & longer lasting
• 3 x smoother
• Hard-wearing to chemicals
• Lasting & perfect results
• Hair respected & sublimated
Advanced Heat Management™
system
The straightener combines the latest
in self-regulating heating elements,
the Advanced Heat Management™,
which provides precise and continu-
ous electronic regulation of the tem-
perature. This technology means the
unit heats up immediately, reaching
a very high temperature and main-
taining the temperature to the near-
est half degree. It also has a broad
range of recuperation reaction and
capacity.
STRAIGHTENING BASICS
• Plug the appliance into a suitable
mains socket and push the (0/I) slid-
er switch once across to switch the
unit on the lowest setting (170°C).
• To select a higher temperature push
the slider switch again (to select ei-
ther 200°C or 230°C)
5