Unifire SAEY SCOPE Notice D'installation Et D'utilisation page 43

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

S
S
/ S
XL
AEY
COPE
COPE
General use
Opening the fire door
The control handle is inserted horizontally in the groove located in the
centre of the door between the left side wall and the door. Pull the
control handle upwards, and the door will open.
The exterior of the stove can become very hot. We recommend using
the heat resistant gloves or the operating handle.
Saey stoves can only be used when the fire door is closed. Once in
operation ,the fire door may only be opened briefly to charge wood.
Opening the filler door
First open the right side wall by inserting the control
handle into the first groove, pushing it up against the
cylindrical pin and pulling it gently
Controlling combustion air
Combustion air is controlled at the back of the stove, by preference with the help of the operating handle.
By placing the air regulation in the extreme right position, the air supply will be fully closed. If the air regulation is
positioned in the middle, then air supply is set to its half capacity. The air supply is set to its maximum capacity when
the air regulation is in the extreme left position.
Hook the control handle into the opening of the filler
door lock and pulled upwards
ENGLISH
43
29032012 – v01

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Saey scope xl

Table des Matières