Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

GUIDE D'INSTALLATION
RAPIDE
Switch Gigabit
18 ports / 16 PoE
XFS - 1816P
Inclut :
Switch PoE 18 ports
Kit de montage sur montants 19'' et cordon
d'alimentation
0 334 91
www.legrand.fr

Publicité

Table des Matières
loading

Sommaire des Matières pour LEGRAND XFS-1816P

  • Page 1 GUIDE D'INSTALLATION RAPIDE Switch Gigabit 18 ports / 16 PoE XFS - 1816P Inclut : Switch PoE 18 ports Kit de montage sur montants 19’’ et cordon d’alimentation 0 334 91 www.legrand.fr...
  • Page 2: Installation Physique

    Installez le XFS-1816P dans un endroit stable et abrité pour éviter tout dommage éventuel. Evitez l'exposition à la lumière directe du soleil. Ne placez pas d'objet lourd sur le XFS-1816P et vérifiez que le raccordement de terre de la prise fonctionne correctement. Installation sur bureau/tablette Pour une installation sur bureau/tablette, fixez les quatre pieds en caoutchouc dans les angles échancrés en bas...
  • Page 3: Connexion

    3 - Préparation à l'interface de configuration Addressage IP Si le XFS-1816P doit être installé sur un réseau avec une adresse de type 192.168.0.X et que votre ordinateur par- tage une adresse similaire sur le même réseau, vous pouvez passer à l'étape suivante, "Accès et configuration".
  • Page 4: Bouton De Réinitialisation Mode/Reset

    Ne pas ouvrir, démonter, altérer ou modifier l’appareil sauf mention particulière indiquée dans la notice. Tous les produits Legrand doivent exclusivement être ouverts et réparés par du personnel formé et habilité par Legrand. Toute ouverture ou réparation non autorisée annule l’intégralité...
  • Page 5: Quick Install Guide

    QUICK INSTALL GUIDE 18-Port/16 PoE+/2 Gig Uplink Smart Switch XFS-1816P Includes: XFS-1816P 18-Port/16 PoE+/2 Gig Uplink Smart Switch Rack Mount Kit Rubber Fett Power Cord www.legrand.fr...
  • Page 6: Physical Installation

    1-16 are PoE+ and are enabled by default. Use the included power cable to connect the XFS-1816P to a surge protected outlet. The AC input socket and a power switch are on the rear panel. The built-in power supply supports 100~240Vac at 50/60Hz.
  • Page 7: Getting Connected

    3 - Preparing for Access IP Addressing If the XFS-1816P is connected to a network with a 192.168.0.X address scheme, and your computer shares a similar address on the same network, you can skip to the next step, "Access and Setup".
  • Page 8: Reset Button

    Before carrying out the installation, read the instructions and take account of the product’s specific mounting location. Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees.

Ce manuel est également adapté pour:

0 334 91

Table des Matières