D-Link HSPA+ DWR-730 Guide D'installation page 4

MODEM MODE
QuIcK InStALLAtIOn
InstallShield Wizard
Welcome to the InstallShield Wizard for
DWR-730 USB Modem
WIRELESS SETTINGS
Enable Wireless:
Wireless Network Name:
Wireless Channel:
ROUTER MODE
QuIcK InStALLAtIOn
4
1. Connect the DWR-730 to your PC using the USB cable.
2. User a Web Browser to 192.168.0.1 to log in to DWR-730's
configuration interface. The default username is admin, and the
password should be left blank.
3. After entering Web GUI, choose the "Wireless setting" on the
left; and let the "Enable wireless" in the middle of the page to be
blank.
1. Use your PC's wireless adapter to connect to the dlink_DWR-730
wireless network.
2. Use a web browser to go to 192.168.0.1 to log in to the router's
configuration interface. The default username is admin, and the
password should be left blank.
DWR-730