Publicité
Les langues disponibles
Les langues disponibles
Installation instructions
The cooler should not be placed in direct sunlight!
1. The cooler should be installed on a level surface.
2. After installation, leave the cooler standing for at least two hours
before switching on to avoid damaging the compressor.
3. Voltage: 220V-240V/50Hz.
4. For an optimum temperature, install the cooler in a position where
adequate air circulation is guaranteed.
The warranty will be void if the ventilation vents of the product are
partly or wholly obstructed. An unrestricted circulation of air is
essential to ensure optimal cooling performance and a long working
life.
5. The temperature of the cooler can be adjusted by the thermostat knob.
6. The ideal temperature is dependent upon the quality and temperature
of the products to be cooled and is also affected by the ambient
temperature.
16
Publicité
