Adjusting the push handle
First operate the locking brake
Unscrew the bolt and pull the fixing
bolt completely out
Position the push handle at the
correct height (recommended: the
push handles should be at wrist
height
Finally, reinsert the fixing bolts and
tighten with the star grip nut
Make sure that the bolt goes completely into the hole.
For storing the rollator, you can completely remove the push handles from the frame.
The brake is used during
movement (when pushing) by
pulling the brake lever upwards
Pressing the lever downwards
enables the brake to be used as a
locking brake (for parking)
Adjusting the brake
The braking effect can be adjusted
directly at the brake lever or at the
Bowden cable
The brake is correctly adjusted
when the brake lever and Bowden
cable do not exhibit any play and
the wheels rotate without any
rubbing noises
GB
Ligero
7/16