User Safety Information - Elinchrom ELB 500 HEAD Manuel D'utilisation

• Always switch off the unit before connecting or
disconnecting heads.
• Always switch off the unit before connecting accessories and
reflectors.
• Ambient temperature when the head is in use: -20° C (-4° F)
up to 40° C (104° F).
• Modelling lamp is not intented to operate at maximum power
permanently. To avoid overheat the output light is reduced
automatically.

USER SAFETY INFORMATION

• Because a portable flashhead is frequently used "on
location" please be aware of the danger, or inconvenience,
which it may represent to others for example children.
• Keep flash units out of reach of unauthorised persons
whenever possible.
• Do not use in restricted area (such as hospitals, always ask
permission before).
• Do not use near flammable / explosive material.
• Always switch off the unit before connecting or
disconnecting heads.
• Flashtubes and the LED-reflector dishes may become very
hot during and after use!
• Do not touch the LED; this might cause damage.
• Never touch a flashtube or exchange it before the unit has
cooled down and is disconnected from the battery.
• Do not fire flashes from short distances, directed towards
a person.
User Manual
EN
5