Fiamma A20 Instructions De Montage Et Mode D'emploi page 5

DE
Gebrauchsanweisungen und Ratschläge
FR Instrucions et conseils
IT
Avvertenze e suggerimenti
Check precharge value before installing the expansion tank.
The A20 expansion tank for Fiamma pumps with 1,5 bar pressure switch is
ready for use and precharged at 0,9 bar. For a most efficient use of other
pumps with a different pressure switch, precharge the A20 expansion tank
at the same start pressure of the pump, or not higher than 3 bar.
The A20 expansion tank may be mounted in any position.
The position shown in pictures is recommended, in order to check the
precharge and emptying the water easier.
Check the precharge value once a year.
ATTENTION: Precharged with compressed air to 0.9 bar.
Maintenance instructions
EN
ES
Recomendaciones
FIG.1
COMFORT
5