Schwaiger HDFS100 511 Mode D'emploi Et Consignes De Sécurité page 17

6. If the IR extending function is not work.
• Check if the IR emitter is connected to the HDFS100 Transmitter,
and place the emitter probe in front of the source device's IR
receiver.
• The IR extending function of HDFS100 can work with 30~60kHz
IR remote control system. Some IR remote control systems use
other frequency, or the IR signal pulse is too short that will not
work with IR extending function.
Note
Manufacturer reserves the right to make changes in the hardware,
packaging and any accompanying documentation without prior
written notice.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
HDFS100 incorporates HDMI
OVERVIEW OF TECHNICAL DATA:
Model number
Frequency range
Transmission power
Range
Latency
Resolution
Temperature range
Permissible air humidity
Power supply
Power adaptor
Dimensions
Features and specifications are subject to change without prior notice.
technology.
®
HDFS100 511
WIFI – 5 GHz band (5180 MHz – 5240 Mhz)
10 dBm
up to 30 m (line of sight)
< 0,5 secs
1080p/1080i/720p/576p/576i/480p/480i
0 to +50°C
5 to 90%
5V DC – 1.000 mA
100 – 230V / 50-60 Hz (0.2A)
85 x 85 x 27 (w x d x h) mm
17
USER GUIDE