SEVERIN KGK 8978 Mode D'emploi page 26

c) Loosen 2 screws as shown in the figure
below, in order to remove the gap caver on
the top side of the appliance.
d) Raise the refrigerator door about 50 mm,
in order to remove it from the appliance.
a) Loosen the 3 screws that hold the middle
hinge and then remove it.
b) Raise the freezer door about 50 mm, so
you can remove it from the fridge.
c) Remove the adjustable front stands below
the lower hinge. Then, loosen the 4 screws
that hold the lower hinge and remove it
from the fridge.
The removal of the doors is now finished.
Step 2
a) Install the removed parts on the opposite
side of the appliance. Pull the door socket,
as shown in the following figure, and install
it in the respective position on the other
side.
- 26 -
Step 3