Technical Specifications; Important Observations - BluMill RF-01 Mode D'emploi

TECHNICAL SPECIFICATIONS

EN
Model: RF-01 / V07936
Operating voltage 220-240V
Nominal frequency 50 Hz/60Hz
Energy consumption 1400W
INSTALLATION
•
Install the grill-stone on the heating element.
•
Never set the grill-stone on a hot heating element.
•
Use only the grill-stone supplied with the unit, and only in the unit that was made for it.
•
Never use aluminium foil or anything else under the toaster cover between the heating
element and the reflector.
•
When using the unit in raclette mode, it is advisable to place the cheese in the cooking
dish before placing it in the unit.
CONNECTION AND PRE-HEATING
•
After plugging the unit in, place the switch in the "ON" position (the light will come on).
Let the unit preheat for a maximum of 20 to 30 minutes. During the first five uses, put
a bit of oil on the grill-stone after pre-heating and wipe it with a soft cloth. After pre-he-
ating, the unit is ready for use. Place thin slices of meat, fish, vegetables or fruit on the
toaster cover, toaster tray and let them cook to your taste.
•
Do not place frozen food, or anything too heavy on the hot grill plate
•
Do not put any acidic food items, such as vinegar-based products, mustard, pickles,
etc. on the grill plate. Do not place any objects on the grill plate.
•
Do not leave the unit on and unused for more than 30 minutes. The grill plate will be
too hot for optimal cooking. Use the on/off switch to turn the unit off and unplug it
after use.
4

IMPORTANT OBSERVATIONS

•
The small fissures that are a result of the expansion of the grill plate are natural and do
not hinder the smooth running of the unit in any way.
•
After a few uses, the colour of the grill plate usually becomes permanently darker.
•
During the first use, there may be a slight odour, or a bit of smoke.
Be sure to never put the grill plate in a dishwasher, or to submerge it in water.
The temperature of accessible surfaces may be high when the appliance is operating
MAINTENANCE
•
Let the unit cool completely for at least one hour, without touching the grill plate.
•
During the cooling period, keep the unit out of the reach of children.
•
The body of the unit and the reflector may be cleaned with a sponge, hot water and
dishwashing liquid.
•
Do not use a metallic sponge, or a scouring powder.
•
Do not submerge the unit or the electrical cord in water.
Grill-stone cleaning precautions:
•
Always unplug the appliance and allow it to cool down for about 1 hour before cle-
aning.
•
Clean the appliance after each use to prevent unpleasant smells or fumes from being
emitted when it is used next time.
•
Remove the grill plate, pulling the release catches (L) and wash either by hand in hot
water or in a dishwasher.
•
Leave the plate to soak in warm water to remove any residue left during coking
•
Do not use abrasive tools or cleaning agents as these may scratch or damage the non-
stick coating
•
Refit the clean plate on the appliance making sure that they are perfectly dry.
EN
5