Gram Precision CSX Série Manuel D'utilisation page 6

USE OF CRANE SCALE
* POWER ON
OPERATION
Press the on the scale.
NOTA: To obtain the maximum perfomance, once the balance is connected, allow it a
warm up for 3-5 minutes.
* ZERO
OPERATION
Press the
scale
Press the
remote control
Condition
The crane must not be in HOLD mode. Otherwise, error message
flashing.
The crane must be stable. Otherwise, error message
Current weight reading is in MANUAL-ZERO RANGE. Otherwise, error message
will flash.
* TARE IN
OPERATION
Press the key on the scale.
Press the TARE key on the
remote control
DISPLAY
888888
500.0
U   
- - - - -
key on the
key on the
This message is showed twice.
The display shows the scale´s capacity.
The display shows the battery voltage.
Stability signal
0 Ready to weight.
DISPLAY
0
0
DISPLAY
0
0
ILLUSTRATION
ILLUSTRATION
The display remains at zero.
The indicator
on.
will keep
will flash.
ILLUSTRATION
Press this key to subtract the
weight of a container and then
get the net weight of the
product.
The indicator
lights
lights on
6