LENCO LS-101 Mode D'emploi page 9

Do not rely on AUTO STOP alone to turn off playback.
The PITCH CONTROL allows you to fine tune the playing speed of the record once the correct speed
(33/45/78 RPM) is chosen. Rotate the PITCH CONTROL to slightly increase or decrease the speed of the
turntable if necessary.
To stream your record music to external Bluetooth speakers (not included), see the BLUETOOTH OUT
OPERATION section.
3. Bluetooth out operation
This turntable supports Bluetooth wireless connection (
compatible headphones (not included) or Bluetooth speakers (not included).
1. Turn on the unit by the POWER/VOLUME Knob.
2. Rotate the FUNCTION SELECTOR to select the
3. The POWER/FUNCTION INDICATOR will light "blue" and begin to flash
slowly.
4. Turn ON your external Bluetooth receiving device (such as Bluetooth
headphones or Bluetooth speakers) and set to pairing mode.
5. When pairing is successful, the POWER/FUNCTION INDICATOR will stop
flashing and remain lit "blue".
6. You are now connected to your external Bluetooth device.
7. Begin playing a record, the sound will be heard from the external Bluetooth device.
Note: You can ONLY adjust the volume using the volume control on your external Bluetooth device.
Notes:
Place the Bluetooth device within 3 feet (1m) from the turntable to enable them to pair correctly.
•
The turntable stays in the pairing mode for only 30 seconds. If pairing is not properly completed within
•
30 seconds, repeat Step 2 till 4 again after turning all devices OFF.
" OUT" only works in PHONO mode.
•
function modes.
4. Listen to Bluetooth
An external device with Bluetooth Connectivity like a smartphone or tablet be wirelessly connected to this
Turntable using the Bluetooth function.
1. Turn on the unit by the POWER/VOLUME Knob.
2. Rotate the FUNCTION SELECTOR to select the
3. The POWER/FUNCTION INDICATOR will light "blue" and begin to flash.
4. The first time you use your Bluetooth device with the turntable, you will
need to pair them together.
5. Turn your external device's Bluetooth Setting ON. Wait a moment, then
look for the Bluetooth pairing name "Lenco LS-101". If your device asks for
a password (depending on the device manufacturers, model, and
software version), then enter digits "0000" and press OK.
6. Select the Bluetooth pairing name, to connect the unit. Once connected, the Led light will stop flashing.
7. You are now connected to your external device via Bluetooth
8. Rotate the Volume Control Knob to adjust the sound level and adjust the volume control at your external
audio device.
OUT). It can be connected with external Bluetooth
OUT mode.
OUT will NOT work in the AUX IN or regular Bluetooth (
IN mode.
7
IN)