ACME Prime Q250 Raider Manuel D'utilisation page 18

360° Flip Mode
As soon as you are familiar with the control, you can perform a flip. Make sure that the model has
reached sufficient height (minimum 3 meters). Now press the flip- button on the controller and then
move the right stick in your favorized direction to perform a flip.
Camera (optional)
Video- and Photo recording
The model is equipped with a mount to attach a camera optionally. This can be mounted underneath
the battery cover.
Additionally, the camera has to be connected to the provided port on the model.
The camera will be released through the controller.
Carefully insert the micro SD- Card into the camera. Switch on the model. The LED on the camera
module is permanently blue. If it is flashing red, it indicates that either the card is full or not inserted.
To take a photo, press the photo- button (rear right). The red LED will flash shortly. To start a video,
press the video- button (front right). The LED will be constantly red during recording. To stop the
recording, press the video- button again. The LED will then switch off.
www.ACME-online.de
ACME the game company