Information On The Product; Product Description - OBO Bettermann UDHOME 2 G Notice De Montage

UDHOME 2 G
3

Information on the product

3.1

Product description

7
6
5
4
Fig. 1: Floor socket product description
The floor socket consists of:
– 1 Hinged cover (2 variants: with and without floor covering
recess)
– 2 Housing
– 3 Height-adjustment screws
4
– Empty pipe entry
– 5 Heavy current mounting support (equipment according to
scope of delivery)
6
– Cord outlet
7
– Mounting protection cover
– Accessories: Data technology support, height extension
Square floor socket for dry-care floor coverings on screed and for
indoor system floors. Housing with a cable outlet in the hinged
cover with floor covering recess/hinged cover with decorative plate.
With eight pre-marked entry openings for installation pipes (M20/
M25). The frame can be adjusted to the top edge of the floor cover-
ing using four height adjustment screws. The minimum installation
depth is 100 mm for the cover variant without a floor covering re-
cess and 110 mm for the cover variant with a floor covering recess.
Information on the product
1
2
3
35 |EN