König Electronic SAT-USB01-KN Mode D'emploi page 5

Chapter 5: ProgDVB Software Usage
1. Click the ProgDVB icon on the desktop.
2. Select DVB card type for ProgDVB: When use ProgDVB comes from SAT-USB01-KN product package go
directly to step 3.
Click on the "Settings"→ "Device list" to choose the type of card installed to work with ProgDVB.
From this window, you can see what type of card is configured for ProgDVB to use:
3. DiSEqC and LNB settings:
Important thing to define is the DiSEqC switch parameter to connect 1 or more (more requires a DiSEqC
switch) satellites to DVB card. Enter the correct settings of LOF1, SWITCH, and LOF2.
→ One LNB/antenna to DVB card, select NONE on the DiSEqC box.
→ Multiple satellites or LNBs select DiSEqC 1.0 or 2.0.
→ Click a green dot, select ADD LNB or highlight an already configured LNB, and click "Property" on the
right.
In the LNB settings window, select the correct values. Most satellites use the settings as in the following
picture:
5