Package Contents - König Electronic SAT-USB01-KN Mode D'emploi

Package contents

• Power supply (7.5 V/1 A) and USB cable
• Installation CD (contains User's Guide) with driver and software
• Quick Install Guide
• Remote control
Installation
1. Connect SAT-USB01-KN to USB2.0 port.
2. Connect the power supply to the USB box.
Chapter 3: Installing the driver and software
Installing the driver
Start the computer. The first time after installing the SAT-USB01-KN or after plugging in the USB box, the
message "Found New Hardware" appears.
1. The "Found New Hardware Wizard" starts.
→Select the option "No, Not at This Time" within the dialog "Can Windows Connect to Windows Update to
Search for Software?"
→Click "Cancel" to continue
→Unplug the USB connector.
→Insert the driver CD and start installation of the driver, or just run "Drivers\setup.exe".
→Microsoft Certification, click "Continue Anyway" until it is finished.
2. Connect the SAT-USB01-KN to the computer again.
→"Found New Hardware Wizard" will automatically find the driver location.
3. Now this message appears.
→Drivers for the "DVBS Video" contain no driver signature from Microsoft.
→Click "Continue Anyway" to complete the driver installation.
Installation of software packages
The installation of the data reception application, Server4PC, is a run through installation.
1. First the language menu appears.
→Choose language (e.g. English) and click "OK" to proceed.
2. Click "Next" to proceed.
3. Read the DVB License Agreement and click "Yes" to accept.
4. Use the default destination folder or choose a destination path by using the "Browse" button.
Press "Next" to proceed.
5. Press "Next" to proceed with the software installation and install the MPEGCAP software and MPEG4
plug.
6. When installation of ProgDVB is completed, restart computer to activate the changes. Save data and
close all applications first. Then click "Finish" to complete the setup and restart computer.
3