Radiometer Analytical TitraLab TIM840 Guide D'utilisation page 44

Customising the workstation
You can assign a name to your workstation, which will be permanently
displayed in the title bar of the Main window. Typing the name will allow
you to get used to using the instruments keypad.
1. Before leaving the Configuration menu:
• Select PC keyboard,
• select English (US).
This allows you to use a QWERTY keyboard.
2. Press Esc to return to the SETUP menu.
3. Press 3 (Customise).
4. Press  to select the Station parameter.
5. To replace "TIM840" by "Chem.lab-1", proceed as follows:
Press 7 until the letter "C" appears, then release the key. The
•
cursor moves to the next position.
44
Chapter 2
Customise
screen displayed
for a TIM840.