Wireless Range; Display Setup; Maintenance And Cleaning; Optional Accessoires - Indexa DF-250 Mode D'emploi

The playback can be controlled by clicking the following symbols:
Playback / Pause /
Forwards / Stop
The files can be deleted using the following symbols:
Delete selected file
Delete all files
Note: The storage location on the hard disc can be seen by clicking
"Storage".

14.11 Display setup

!
Click .
!
Click "Display".
!
If you wish to have a time and date stamp on the recorded images then
click on "Time Stamp".
!
If you wish to write the name of the camera on the recorded images then
click on "Camera Name" (in this case the camera name must also be set).
!
Enter the camera name if required.
!
Click to activate the selected settings.
14.12 Advanced function: camera pairing
If you wish to pair the camera to another channel or to pair an additional
camera (max. 3 additional cameras) with the monitor this can be done using
the buttons on the monitor (see section 12.4) or alternatively on the PC:
!
Click .
!
Click "Device".
!
Check that the camera is powered (POWER LED [9] lights red) and that it is
within the reception range of the monitor.
!
Open the rubber flap [8] covering the "pairing" button with a pointed
object, pulling up from the left hand edge.
Backwards /
!
Check that "Digital Wireless Camera" is selected.
!
Click on the chosen camera channel "CAM1" to "CAM4".
!
Within 60 seconds press the pairing button [13] on the camera and hold it
pressed for 5 seconds.
!
Click to save the selected settings.
A successfull connection is indicated by the display of the camera picture on the
screen and the lighting of the green connection LED [12].

15. Wireless range

The wireless range is dependent on many factors. In an ideal location and by
and
free line of sight (between both antennas) a range of up to 200m is possible,
within buildings this is reduced to maybe 20m.
The range cannot be guaranteed as it is dependent on the local conditions.
A reduction of the range will be caused by:
!
Walls and Floors, in particular those of metal or with metal reinforcement
!
Coated windows (eg. those with Insulating glass), radiators, mirrors and
other metal surfaces
!
Electrical cables and electrical products (eg. those containing electrical
motors, microwave ovens)
!
Devices using the same or similar frequency eg. WLAN-systems)

16. Maintenance and cleaning

!
The products are maintenance-free: do not open the housings
!
Check the safety and function regularly
!
If the range of the remote control becomes weak, replace the battery
(CR2025).
!
Remove the mains adapters from the mains sockets before cleaning
!
Use a soft, slightly moist cloth or brush to clean the surfaces
Do not clean using carbon rich cleaners, Petrol, alcohol or similar. These
can be damage the surfaces. Also the fumes cause a danger to health
and of explosion. Do not use any sharp tools (eg screwdrivers) or metal
brushes for cleaning.

17. Optional Accessoires

!
Additional camera DF-200K with accessoires. Art. Nr. 27 233
!
A/V extension cable, 3,5mm
Art. Nr. 27 234
18. Disposal
Do not dispose of packaging material, used batteries or products as
household waste. Please use your recycling system. Details are
available from your local authority.
Æ
Stereoplug / socket, 10m.
GB - 45