Accessories - Southwire 18V MAXTerm Manuel De L'utilisateur

Coupe-câble
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Backup Release Valve
If the jaws need to be opened without completing the
cycle, press and hold the backup release valve. Hold
tool securely until the cylinder retracts fully.
Jammed Blades
Dirt and debris can cause the blades to become
jammed together after a cut. If the tool shuts off and
the blades are still closed:
1. Press and hold the backup release valve to ensure
the tool has reset.
2. Remove the battery pack.
3. Remove the jaws from the tool.
4. Use a soft mallet to tap the rear of the jaws to
release.
5. Clean any dirt and debris from the blades before
starting another cut.
MAINTENANCE
To reduce the risk of injury, always
WARNING
unplug the charger and remove the
battery pack from the charger or tool before
performing any maintenance. Never disassemble
the tool, battery pack or charger. Contact
Southwire Tools & Assembled Products for ALL
repairs.
Maintaining Tool
Keep your tool, battery pack and charger in good
repair by adopting a regular maintenance program.
Inspect your tool for issues such as undue noise,
misalignment or binding of moving parts, breakage of
parts, or any other condition that may affect the tool
operation. Return the tool, battery pack, and charger
to Southwire Tools & Assembled Products for repair.
After six months to one year, depending on use, re-
turn the tool, battery pack and charger to Southwire
Tools & Assembled Products for inspection.
If the tool does not start or operate at full power
with a fully charged battery pack, clean the contacts
on the battery pack. If the tool still does not work
properly, return the tool, charger and battery pack, to
Southwire Tools & Assembled Products for repairs.
Jaws and Blades
Inspect jaws for cracks or damage. Do not use dam-
aged jaws. Replace the blades when they become
dull, rounded, chipped, or damaged.
Hydraulic Fluid
To extend the life of the tool, return the tool to
Southwire Tools & Assembled Products for hydraulic
fluid replacement after 20,000 cuts or 2 years of use.
To reduce the risk of personal in-
WARNING
jury and damage, never immerse
your tool, battery pack or charger in liquid or
allow a liquid to flow inside them.
Cleaning
Clean dust and debris from vents. Keep handles
clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain clean-
ing agents and solvents are harmful to plastics and
other insulated parts. Some of these harmful agents
include gasoline, turpentine, lacquer thinner, paint
thinner, chlorinated cleaning solvents, ammonia and
household detergents containing ammonia. Never
use flammable or combustible solvents around tools.
For repairs, return the tool, battery pack and charger
to Southwire Tools & Assembled Products.
Repairs

ACCESSORIES

Use only recommended accesso-
WARNING
ries. Others may be hazardous.
For a complete listing of accessories, go online to
www.southwiretools.com.
For all warranty, customer service, and product
return authorizations and inquiries, please contact
Southwire Tools & Assembled Products at:
Southwire Tools & Assembled Products
840 Old Bremen Road
Carrollton, GA 30117
Phone Number: 1.855.SW.Tools
www.southwiretools.com
WARRANTY
Every Southwire power tool is warranted to the original purchaser only
to be free from defects in material and workmanship. Subject to certain
exceptions, Southwire will repair or replace any part of the electric
power tool which, after examination, is determined by Southwire to
be defective in material or workmanship for a period of five (5) years*
after the date of purchase unless otherwise noted.
Return of the power tool to Southwire or a Southwire factory service
center freight prepaid and insured, is required. A copy of the proof of
purchase should be included with the return product. This warranty
does not apply to damage that Southwire determines to be from re-
pairs made or attempted by anyone other than Southwire authorized
personnel, or from misuse, alterations, abuse, normal wear and tear,
lack of maintenance, or accidents.
All Milwaukee batteries and chargers are covered under separate and
distinct warranties available for those items. For more information,
visit www.milwaukeetool.com/service/milwaukee-warranty/cordless-
battery-pack.
Warranty Registration is not necessary to obtain applicable warranty on
a Southwire power tool product. The manufacturing date of the product
will be used to determine the warranty period if no proof of purchase
is provided at the time warranty service is requested.
THE REMEDIES SET FORTH ABOVE ARE YOUR EXCLUSIVE REM-
EDIES RELATING TO YOUR WARRANTED SOUTHWIRE ELECTRIC
POWER TOOL. IN NO EVENT SHALL SOUTHWIRE BE LIABLE FOR
ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR EXPENSES,
LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF
ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT
INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF
PROFITS. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL.
TO THE EXTENT PERMITTED BY LAW, SOUTHWIRE DISCLAIMS
ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH
DISCLAIMER IS NOT PERMITTED BY LAW; SUCH IMPLIED WAR-
RANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE
EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR-
RANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE.
Model: _______________________________
Date of Purchase: _____________________
Distributor: ___________________________
5
SERVICE

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Scu6-b

Table des Matières