Drain - Maxx Ice MIM50 Manuel D'installation, D'instruction Et D'entretien

11/07/2017 PK
Turn on the main water supply and tap. Check for water supply connection leaks. Tighten every connection
5.
(including connection at the water inlet).
NOTE: When you connect the water supply hose and the drain hose, pay attention to the
indications of "Water inlet" and "Drain outlet" on the ice maker.

Drain

You must connect the drain line before using the ice maker. Follow the steps below.
There are two types of ice machine modes, one that drains by gravity and one that has an internal drain pump.
The MIM50P and MIM50P-O models come with an internal drain pump that can pump out water up to a rise of 1.5m
(59")
or over a horizontal length of 1.5m (59").
9