Control Change - KETRON Audya Série Mode D'emploi

Control Change

▀ Modulation wheel
Status Byte 2 Byte 3
BnH 01H mmH n = LC-1 or HC-1 (lead or harmony
MIDI channel)
mm = modulation amount : 00H -7FH
▀ Portamento time
Status Byte 2 Byte 3
BnH 05H ttH n = LC-1 or HC-1 (lead or harmony MIDI
channel)
tt = portamento time : 00H -7FH (default = 00H)
▀ Volume
Status Byte 2 Byte 3
BnH 07H vvH n = LC-1 or HC-1 (lead or harmony
MIDI channel)
vv = volume : 00H -7FH (default = 64H = 100)
▀ Pan
Status Byte 2 Byte 3
BnH 0AH ppH n = LC-1 or HC-1 (lead or harmony
MIDI channel)
pp = pan : 00H -7FH (default = 40H = 64)
0 = full left, 64 = center, 127 = full right
▀ Expression
Status Byte 2 Byte 3
BnH 0BH eeH n = LC-1 or HC-1 (lead or harmony
MIDI channel)
ee = expression : 00H -7FH (default = 7FH)
▀ Portamento On/Off
Status Byte 2 Byte 3
BnH 41H ppH n = LC-1 or HC-1 (lead or harmony
MIDI channel)
pp = switch : 00H = off, 01H -7FH = on (default =
00H)
▀ Reverb/Echo Send Level
Status Byte 2 Byte 3
BnH 5BH rrH n = LC-1 or HC-1 (lead or harmony
MIDI channel)
rr = reverb/echo send level: 00H -7FH (default = 64H)
▀ Pitch Bend Change
Status Byte 2 Byte 3
EnH llH mmH
n = LC-1 or HC-1 (lead or harmony MIDI channel)
ll = value LSB : 00H -7FH (default = 00H)
mm = value MSB : 00H -7FH (default = 40H)
MSB-LSB : 00-00H = -1 octave, 40-00H = no pitch
bend, 7F-7FH = +1 octave
MIDI Implementation
▀ GM VOICE
Control Change 00, value = 0/1/10/11
Program Change 1-128
▀ PROGRAM VOICE
Control Change 00, value 9 (for old
compatibility)/20/21/22
Program Change 1-128
▀ PRESET VOICE
Control Change 00, value 30/31/32/33
Program Change 00
▀ DRAWBARS
Control Change 00, value = 5
Program Change 1-128
▀ INSTRUMENTS
Control Change 00, value = 3/6
Program Change 1-128
▀ VOICE LIST
Control Change 00, value = 8/35/36
Program Change 1-128
▀ GROOVE
Control Change 00, value = 4
Program Change 1-128
185
KETRON • AUDYA