Technical Information - Bartscher 150982 Mode D'emploi

GB/UK

Technical information

----------------------------------------------------------------------------------------------------------
Name:
Code-No.:
Construction:
Dimensions:
Capacity:
Weight:
----------------------------------------------------------------------------------------------------------
In accordance with intended use
Insulated dispenser is intended only for keeping drinks at high or low temperature.
Insulated dispenser should only be used for appropriate beverages.
Insulated dispenser must not be filled with dangerous liquids!
Insulated dispenser is not appropriate for milk and fizzy drinks.
Insulated dispenser should not be used for freshly-squeezed orange juice and other
beverages which contain fruit pulp, as they can cause clogging of the spigot. In the
case of tea, pay attention to leaves which may block the spigot.
Tips for the user
•
Place the unit on a level, stable surface which can support its weight.
•
Prior to first use, clean the reservoir, cover and spigot thoroughly. Rinse with clean
water and drain through the spigot.
•
Fill the reservoir with a hot or cold beverage. The amount of liquid contained can be
seen on the front-side indicator.
•
Close the lid, turning it clockwise.
•
Owing to the double-wall construction from stainless steel, the insulated dispenser
keeps drinks at high or low temperatures for many hours.
Insulated dispenser, double-walled
●
● 150982
● Casing: stainless steel;
Inside, cover and handle: artificial materials
● W 165 x D 185 x H 460 mm
● 3,0 litres
● 1,63 kg
- 3 -