Maintenance; Environmental Protection; Warranty - Hausmann PT100708 Guide De L'utilisateur

MAINTENANCE

Before cleaning or performing maintenance on the saw, pull the plug from
the power source. Always keep the machine clean and properly maintained
for safety and performance purposes.
For extreme conditions when working with metal, conducting dust can collect on
the interior of the machine. The protective insulation of the machine can be
degraded. In such cases, it is recommended that the ventilation slots be blown
out frequently and that a ground fault circuit interruptor (GFCI) be connected in
series with the machine.
To ensure long term flawless operation of the machine, the saw blade holder
should be cleaned regularly. This can be done by lightly tapping the machine with
the foot plate on a flat surface without a saw blade inserted. if necessary, the saw
blade holder should be cleaned by blowing it out with compressed air.
Repairs to the tool should be carried out by an authorized service technician
using orignal replacement parts.
If the power cord becomes damaged and must be repaired, do not connect
the blue or brown wire of the power cord to the earth terminal of the plug.
Important: If for any reason the plug is cut off of the power cord of this machine. It
must be disposed of safely and not left unattended.

Environmental protection

Do not throw out recyclable materials in your waste disposal.
Machine, accessories and packaging should be sorted for environmentally
friendly recycling. These instructions are printed on recycled paper manufactured
without chlorine. The plastic components of the tool are labelled for categorized
recycling.

WARRANTY

Thank you for investing in a HAUSSMANN power tool. These products have been
made to demanding, high-quality standards and are guaranteed for domestic use
against manufacturing faults for a period of 36 months from the date of purchase.
This guarantee does not affect your statutory rights. In case of any malfunction of
your tool (failure, missing part, etc.), please contact one of our service technicians
at our toll free service line at 1-866-206-0888 from 8 AM to 6 PM, Monday to
Friday, Eastern time. RONA reserves the right to repair or replace the defective
tool, at its discretion.
Normal wear and tear, including accessory wear, is not covered under guarantee.
The product is guaranteed for 36 months if used for normal trade purposes. Any
guarantee is invalid if the product has been overloaded or subject to neglect,
improper use or an attempted repair other than by an authorized agent.
Heavy-duty, daily professional or hire usage are not guaranteed. Due to
continuous product improvement, we reserve the right to change the product
specification without prior notice.
23