Technical Data - EINHELL Bavaria BLP 100 Mode D'emploi

Anleitung BLP 100 SPK 1 neu

Technical data

Mains voltage 230 V ~ 50 Hz
Power rating 100 W
Heating phase 12 seconds
OFF phase 48 seconds
Light 0.25 A / 0.55 W
Totally insulated
Weight 0.625 kg
The specification „S3 1 min. 20%" on the
rating plate means that you may activate the
soldering gun for 12 seconds, after which it
has to remain OFF for 48 seconds. If you fail
to observe this point, the soldering tip will
overheat and the soldering gun will be dama-
ged.
12.02.2003 7:22 Uhr Seite 9
GB
9