Akai Professional FIRE Guide D'utilisation page 3

User Guide (English)
Introduction
Thank you for purchasing the Fire. At Akai Professional, we know how serious music is to you.
That's why we design our equipment with only one thing in mind—to make your performance
the best it can be.
Box Contents
Fire
USB Cable
Software Download Card
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (documentation, technical specifications, system
requirements, compatibility information, etc.) and product registration, visit akaipro.com.
For additional product support, visit akaipro.com/support.
Setup
Fire should be automatically detected and enabled in FL Studio. If it is not, follow the steps
below.
Setting up Fire with FL Studio:
Note: MIDI does not transmit audio; it sends MIDI note and control data (knob movements,
sound/program changes).
1. Use the included USB cable to connect Fire's USB port to an available USB port on your
computer (powered on).
2. On your computer, open FL Studio.
3. In FL Studio, make sure "Enable MIDI remote control" is selected in the Options menu, or
MIDI input will be disabled.
4. Open the MIDI settings by selecting Options > MIDI settings from the main menu.
5. Select the MIDI Input section to display a list of controller devices that have been
detected.
6. Select Fire (or USB Audio Device (generic controller)) and then click the enable switch.
7. Test that MIDI data is being transmitted by pressing a button or turning a knob on Fire.
The MIDI activity light in the Main Panel of FL Studio will blink each time controller data is
received.
3