Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3. Level
This control adjusts the subwoofers master output level. Turn clockwise to increase
and counter-clockwise to decrease the level.
4. Crossover
The Crossover control adjusts the YSS2's low-pass frequency filtering for the subwoof-
er output. Available low-pass settings are 50 Hz, 80 Hz, 20 Hz and 200 Hz.
5. RCA Line Input Jacks
These RCA jacks provide a connection for external audio sources that provide
line level signal.
6. RCA Line Output Jacks
The RCA jacks labeled Output are used to pass-through the audio signal from the
Input to another amplifier.
7. Input / From Amplifier Terminals
These spring-loaded terminals on the YSS2 are used for direct connection from a
power amplifier's speaker output.
8. Output / To Speaker Terminals
These spring-loaded terminals are used to connect to the main system speakers.
2 2
PHASE
°
°
0
(Norm)
180
POWER
AUTO
OFF
ON
YSS2
OUTPUT
TO SPEAKER
NOTE: Phase can be used to describe the relationship of superimposed audio waves. By super-
posing audio waves using different phase shifts the audio waves can reinforce each other (0° shift
= in phase), cancel out each other (180° shift = out of phase), or partially cancel (neither totally
in phase or out of phase). When two audio sources (such as two speakers) are in phase you will
notice better bass response; if they are out-of-phase the audio bass response will be reduced.
Note: The spring terminal inputs are typically used for connecting to a system that does not pro-
vide line level or preamp outputs.
Note: When using the Input / From Amplifier spring-loaded terminals as an input to the YSS2, the
spring-loaded output terminals connect to the main system speakers.
SUBWOOFER
CROSSOVER
LEVEL
FREQUENCY
MIN
MAX
50
200
Hz
ACTIVE STUDIO
S U B W O O F E R
INPUT
FROM AMPLIFIER
YSS 2
INPUT
OUTPUT
Publicité
Table des Matières
