How To Install The Dual Ir Emitters - Philips Rfx6500/17B Mode D'emploi

Once you have found the best position, you can optionally mount the Blaster unit
onto a piece of furniture using the mounting plate and screws, which are included.
1 Screw the mounting plate to a rack, closet or another piece of
furniture.
Provide sufficient space to connect the power adapter and to slide the Blaster
unit back on.
Note
2 Slide the Blaster unit onto the mounting plate.

How to Install the Dual IR Emitters

The Dual IR emitters can be used in combination with, or as an alternative for the
Blaster unit.
1 Plug the Dual IR emitters into the Blaster unit.
User Guide
7
How to Install the RF Extender
Depending on the surface, it may be possible to attach the mounting plate to
the furniture using a piece of 2-sided tape or velcro.