Adjusting The Paper Stop - IDEAL 8590 Mode D'emploi

Adjusting the paper stop

Paper stop
34
1. Switch off the device at the power switch.
Disconnect the mains plug. Open the
bottom cover.
2. Place a sheet of paper in the paper tray.
Set the paper format (paper guide) to your
sheet size. Check the end of the sheet
against the stop.
3. Loosen the 3 screws in the middle of the
paper stop and position the stop to the
end of the paper. Tighten the screws again.
Remove the paper and close the bottom
cover.
