IDEAL 8590 Mode D'emploi page 30

1
Control panel
A
+ –
COUNT MODE
D
4
D
Counter mode
• Press the button for Total counter mode or the
In Preset counter mode, you must define a preset value. Use the plus
minus buttons to adjust the preset value.
–
• Values that are longer than three digits cannot be displayed or set.
E
Staple & fold
• If side stapling
Press the button for side stapling twice to adjust the stapling position within a range
of 8-15 mm. Use the plus
• If centre stapling
• If folding is selected, the device folds without stapling (fold only).
F
Clincher
• Press the button to press the ends of the staples flat
(flat stapling).
• Press the button to bend over the ends of the staples flat
(conventional stapling).
G H
Start Stop
• Press the start
START
binding process.
30
PAPER
SIZE
FREE
A5
STAPLE & FOLD
E
5
is selected, the device staples at the side of the paper.
and minus
+
is selected, the device staples in the centre of the paper.
button to start the binding process. Press the stop
2
B
B5 B4
A4 A5
CLINCHER
F
6
button for Preset counter mode.
buttons to adjust the position value.
–
3
C
PAPER
FEED
START STOP
G H
7 8
and
+
button to stop the
STOP