Felco 880-NP Manuel D'utilisation page 14

to guarantee the purchaser against all consequences of
hidden faults or defects of the item sold.
Keep carefully the details of your device (SEE labels on the
various components) to facilitate communication with our
after sales service and prevent errors in the dispatch of spare
parts.
Before the first start: READ CAREFULLY THIS USER
MANUAL.
SPECIAL GUARANTEE TERMS
FELCO 880-NP
FELCO SA guarantees its BATTERY for a period of THREE
YEARS as of the date of delivery to the end customer under
the following conditions:
• the number of recharges does not exceed 200 per year,
• the battery is used between -5°C (23°F) and +30°C
(86°F),
• the battery is charged between +10°C (50°F) and
+25°C (77°F),
• the battery is charged at least once every year,
• the battery does not enter into deep discharge.
FELCO SA guarantees its ELECTRONIC BOARD for a
period of THREE YEARS as of the date of delivery to the end
customer.
NEVER ATTEMPT TO OPEN THE CONTROL UNIT 04,
THE REMOTE UNIT 06, THE BATTERY 09a or 09b OR
THE CHARGER 11, UNDER PENALTY OF
CANCELLATION OF GUARANTEE. CONTACT AN
AUTHORIZED DEALER.
ONLY THE OPERATIONS CONTAINED IN THIS USER
MANUAL ARE ALLOWED.
NOTES
• For the special guarantee terms of the tool used with
the FELCO 880-NP, refer to the user manual of the tool
concerned.
CERTIFICATE OF CONFORMITY
according to "DIRECTIVE 2006/42/CE OF THE EUROPEAN
PARLIAMENT AND COUNCIL" concerning machines.
The undersigned manufacturer: FELCO SA, CH-2206 Les
Geneveys-sur-Coffrane, certifies that the new equipment
identified as FELCO 880-NP complies with standards
EN55014-1 and EN55014-2, as well as FCC 47CFR15
Subpart B and is thus eligible for CE marking.
In addition, the following components are certified according
to the following standards:
TÜV marking
According to standards IEC 62133, UL 1642 & UL 2054
CE-EMC marking
According to standards: EN55014-1 and EN55014-2
PSE
According to standards: DENAN ordinance Article 1,
Appendix 9
C-tick test report
According to standards: AS/NZS CISPR 14 (based on CE
marking)
KC mark
RoHs Certificate
REACH 53SVHC certificate
TÜV GS; CE_LVD; CB marking
According to standards: IEC/EN 61558-1; IEC/EN 61558
Certificate: NRTL + CNRTL
According to standards: UL 1310; CAN CSA C22.2 No223-
M91
CE-EMC marking
According to standards: EN55014-1 and EN55014-2
CB certificate and CB test report
According to standards: IEC 61558-1, 61558-2-6, 61558-2-
17
C-tick test report
According to standards: AS/NZS CISPR 14 (based on CE
marking)
KC mark
According to standard: K609a50
RoHs Certificate
REACH 53SVHC certificate
MATERIAL
• The technical characteristics are given for information
purposes; they are in no case contractual.
• FELCO SA reserves the right to make any design and
manufacturing changes deemed necessary in order to
enhance PERFECTION.
- 14-
Battery:
Charger
FELCO SA
Christophe Nicolet
CEO