Maintenance And Cleaning; Disposal - Parkside PTIA 1 Instructions D'utilisation Et Consignes De Sécurité

Fault
Incorrect tempera-
ture value is
shown on the
display.

Maintenance and Cleaning

E nsure that no water enters the product during cleaning!
R egularly clean the product with a dry, lint-free cloth.
I f the product is very dirty, use a slightly damp cloth with a detergent.
E nsure no objects enter the opening for the infrared sensor
only clean the opening with light compressed air.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of
at local recycling facilities.
Observe the marking of the packaging materials for waste separation,
which are marked with abbreviations (a) and numbers (b) with follow-
b
a
ing meaning: 1–7: plastics / 20–22: paper and fibreboard / 80–98:
composite materials.
The product and packaging materials are recyclable, dispose of it sep-
arately for better waste treatment. The Triman logo is valid in France only.
Possible cause
Low battery.
Did not allow about 30 min-
utes for the product to accli-
mate to the environmental
condition after an ambient
condition has been changed
drastically.
Not suitable measuring
surface.
Solution
Replace with new battery
Allow about 30 minutes for
the product to acclimate to
the environmental condition.
Change the measuring
surface.
. If necessary,
2
GB/IE 29