Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
operations
Turning on or off
Move the Power switch on the rear of the speaker to on position
to turn it on. to turn it off, move the switch to oFF position.
Pairing with an iPhone
To use an iPhone with the speaker, you must first pair and
connect them.
1. Turn on the Bluetooth feature of your iPhone. Click Settings,
general, Bluetooth and oFF, then the iPhone searches for
available devices.
2. turn on the speaker, then press and hold
3 seconds until the orange and blue LED flash alternately.
3. When the iPhone finds the SPEETUBE, click Not Paired to
connect it. after the Bluetooth connection is successful,
connected appears, and the blue LED flashes twice every
2 seconds.
Notes
• If the paring is not complete within 3 minutes, the speaker will quit
the pairing mode. You need to repeat the steps of pairing again.
• After the connection is successful, if you turn the speaker off and
turn it on again, it will be connected to the last connected iPhone
automatically. Also, a beep will be heard.
• When the Bluetooth connection is disconnected, press
re-connect it.
EN ::: 22
for about
to
Publicité
Chapitres
Table des Matières
