SCS SPEETUBE Manuel D'installation Et D'utilisation page 21

Charging
The speaker has a built-in Li-ion battery (3.7V, 1.6A), so it can be used without
connecting with a power supply. To charge the battery, follows the steps
below:
1. Connect the plug of the power supply (7.5V, 2A) to the power jack of the
speaker, and then plug the power supply into a standard AC wall outlet.
2. To charge your iPhone5, insert it on the charging cradle of the speaker.
You can adjust the visual angle of the iPhone according to your needs
(from 70 degrees to 85 degrees). Set screw adjustment for the thickness
of your smartphone (see page 20).
Notes
• When the speaker is in charging mode, the red LED is on.
• If you need to use the speaker without the power supply, charge the
battery 3 hours or more. You can also connecting the power supply
before use.
• When the battery inside the speaker is full, the music playing can last
for up to 20 hours.
Important note
Different volume on the iPhone should be set separately.
• Ringer volume: press
in the standby mode.
• Media volume: press
• Receiver volume: press
• Speaker volume: press
or on the left side of iPhone
or during music or video playing.
or during a conversation.
or during the speaker mode.
EN ::: 21